Skip to content

Printers / Prusa MINI / MINI+

Prusa MINI / MINI+
Gridfinity on the

Prusa MINI / MINI+

A 180 × 180 mm bed prints Gridfinity baseplates up to 4 × 4 units in one piece.

Biggest plate4 × 4
That is168 × 168 mm
Tallest bin25 units
180 × 180 mm

How it works

  1. Measure the drawer. Inside width and depth, in millimetres.
  2. Open the generator with the Prusa MINI / MINI+ chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
  3. Download one 3MF with every tile and the clip sheet, open it in your slicer and print.

Keep it printing

Prusa's own maintenance guides, and our routine for any printer in Printer care.

Prusa Lubricant goes on smooth rods and Z leadscrews, not on linear rails.

Printers with the same bed