Every system / openGrid
Walls and under desksopenGrid
An open wall grid of 28 mm octagon cells. Print the board and a fit test, then snaps, hooks, shelves, bins and racks that click in.

Make
Free, in your browser, and every part is made to print without supports.
openGrid engineBoards, snaps, hooks, shelves, bins and racks, live in 3D.
Board connectorsClips that join boards edge to edge.
Multiconnect adaptersHang Multiconnect accessories on openGrid.
Fit testPrint this first to tune the snap for your printer.
Under-desk plannerLay out boards, drawers, trays and cable runs under your desk to scale.Learn
Guides, lessons and docs for openGrid, from the basics up.
How it works
Boards screw to the wall (Lite, 4 mm) or hang on mounting snaps (Full, 6.8 mm). Snaps push into the cells until they click, and accessories fix to the snaps. It is open, so anyone can make parts for it.
What you need
- A 3D printer
- PLA or PETG
- Screws and wall anchors
From makers
Guides, build logs and videos from people who’ve made it. Made something with openGrid? Share how.
No guides from makers yet. Be the first.
Suggest a guide
Other people’s tools
Other generators for openGrid, and what each is good at. Use what suits you.
- openGrid on Printables by David D and the community
The original boards and snaps, and a growing set of accessories and mounts.
- openscad-opengrid by Morgan Prior
An MIT-licensed OpenSCAD library of openGrid snaps and test tiles for designing your own accessories.
openGrid is by David D, shared under CC BY 4.0. VERTEX parts are openGrid compatible, not official.