VERTEX · Hybrid Enclosure Foundry
Cut the walls. Print the corners.
A box from laser-cut panels, held by eight printed corner blocks or by finger joints cut into the panels themselves. Set the size, the sheet and the corners, pull it apart to see how it goes together, then take the cut plate to the laser and any printed parts to the printer.
- Panels
- Acrylic · ply
- Corners
- 8 printed
- Or
- Finger joints
- Kerf
- Allowed for
- Files
- SVG · DXF · 3MF
The box
Laser kerf and panel fit
The laser burns away the kerf on every cut: panels are drawn half a kerf bigger and holes half a kerf smaller, so they come out at size. Finger joints get the same treatment, so the fingers fit snug. Measure yours and it fills in here.
How it goes together
Laser-cut panelsPrinted corner blocksFixings
The printed parts
One corner block, printed eight times, any face down. The 3MF has the block and, with a fan, the flange.