Skip to content
VERTEX · Material Memory

Your printer's holes, learned.

Every printer and filament makes holes a little small. Print one, measure it, and VERTEX remembers the difference for that material. From then on the generators draw holes that come out at the size you asked for.

Measure and learn

Print a part with a plain round hole (the clearance test has a 10 mm one), let it cool, and measure the hole with calipers in two directions. Enter the average.

What the software corrects

Designed Printed Corrected

Saved profiles

Kept in this browser. The one in use is what the generators read.

    The Hybrid Enclosure Foundry reads the profile in use and grows its bolt holes and bores by the offset. The holder generator takes it as extra pocket clearance through the link above.