Printers / Bambu Lab A1 mini
Gridfinity on theBambu Lab A1 mini
A 180 × 180 mm bed prints Gridfinity baseplates up to 4 × 4 units in one piece.
Biggest plate4 × 4
That is168 × 168 mm
Tallest bin25 units
How it works
- Measure the drawer. Inside width and depth, in millimetres.
- Open the generator with the Bambu Lab A1 mini chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
- Download one 3MF with every tile and the clip sheet, open it in your slicer and print.
Keep it printing
Bambu Lab's own maintenance guides, and our routine for any printer in Printer care.
- Official maintenance guide ↗
- X1 series ↗
- P1 series ↗
- A1 ↗
- A1 mini ↗
- H2 series (H2D) ↗
- H2 laser module (40 W) ↗
- Laser cleaning tips ↗
Carbon rods on the X1 and P1 are cleaned, never oiled. Swap the X1’s carbon filter about every three months of daily use.