Turn Digital Logic
into Physical Reality.
VERTEX is the open creative foundry for DIY hardware. Build parametric CAD, simulate your wiring, and fork community logic. We built the tools we wished we had on day one.
Or make a bin right here in ten seconds
- Free in your browser
- 0 supports needed
- 3MF straight to your slicer
Four places. Everything in its place.
Interactive CAD. Set the sizes, turn it in 3D, download a print-ready file.
Gridfinity · Rack panels · Button boxes · EnclosuresOpen Generators LessonsCourses and walkthroughs, from a first print to coding an ESP32 in your browser.
Arduino · Raspberry Pi · Sim hardware · CADOpen Lessons DownloadsReady-to-print parts and models from makers. No CAD needed.
Brackets · Clips · Mounts · Whole buildsOpen Downloads DoctorCheck a model, your slicer settings or a test print before it wastes a spool.
Print Doctor · Strength or speed · Cube checkOpen DoctorMake one in ten seconds.
Move the sliders and download the STL. No account, nothing to install, and it prints without supports.
Zero supports.
Proven, not promised.
Press Check supports on any part and VERTEX slices it the way your printer will, layer by layer, and shows you that nothing starts in mid-air. Bridges, overhangs and holes are all designed to print clean. No scars to sand, no plastic in the bin.
- 0.4 mm layersThe same slicing your printer does, run in your browser.
- 45° or steeperTeardrop holes, chamfered ledges, ribs under every floor.
- Every presetWe check all of them. If one fails, it gets redesigned.
See the community, not just the files.
Every maker on VERTEX is a point. Every follow, print, reply and collected model draws a line between them, and new activity runs along the lines as it happens.
Explore the MeshBuild on the same engine.
Every generator here is also an API. Make bins, baseplates and parts from your own app, shop or inventory, with the files matching the site exactly.
Free, and staying that way.
Every generator is free to use. If VERTEX saved you a drawer of chaos, a small donation keeps new tools coming.
Good to know.
What does "zero supports" really mean?
Before you download, the part is sliced in 0.4 mm layers and every layer is checked to have plastic under it, or at most a 45° overhang, or a short bridge. Press Check supports on any generator to see the report for yourself.
Do I need an account?
No. Every generator works without one. A free account lets you save designs, share your prints, rate what you've made and enter contests.
Which printers and slicers work?
Any. Downloads are 3MF (which opens straight in Bambu Studio, OrcaSlicer and PrusaSlicer) or STL, and you can send a model straight to your slicer from its page.
Is Gridfinity still here?
Yes, all of it: bins, baseplates, clip-together plates for any drawer and holders. It's one of several systems on VERTEX, next to Skådis, openGrid and the Honeycomb Wall.