Electronics workbench
Draw it, check it, then print its case
Lay out the wiring for anything you’re building: a lit shelf, a fan box, a plant waterer, a controller. It checks the voltages, the current, the fuses and the resistors as you go, and tells you in plain words what to change. Learning a single board first? Try the Arduino Lab.
Reading the drawing
- 24 V
- 12 V
- 5 V
- 3.3 V
- Ground (−)
- Signal
Tap a pin, then another, to join them with a wire. Drag a part to move it. A red outline means that part has a problem; a yellow one, a warning. This checks the common mistakes, not everything: read each part’s datasheet, and ask someone qualified before touching mains (240 V) wiring. The workbench never draws mains.