Skip to content
Start here

What do you want to do?

Pick one and we’ll show you where to go, one step at a time. Everything here is free, and you don’t need an account to make or download anything.

I’m new to 3D printing

Find out what a printer can do and which one suits you.

  1. Read the short guide and answer a few questions to find a printer that suits you.

    Open New to 3D printing
  2. See which filament to buy first (it’s almost always PLA).

    Open Filament guide
  3. Follow a step-by-step guide for your first print.

    Open How-to guides

Tidy a drawer

Bins that fit your drawer exactly, and a base that holds them in place.

  1. Measure the inside of your drawer. This page tells you how many squares fit.

    Open Drawer sizes
  2. Make the baseplate: type in your drawer size and download it.

    Open Gridfinity baseplate
  3. Make bins to sit on it, in any size and with dividers.

    Open Gridfinity storage bin

Hang tools on a wall

Hooks, shelves and racks on a wall board or rail.

Do you already have a board on the wall?

Yes, an IKEA Skådis

  1. Check the quick guide so the hooks fit your board.

    Open Skådis guide
  2. Pick a hook, shelf or tray, set the size, and download it.

    Open Skådis Studio

Yes, a pegboard

  1. Pick 1 inch or 25 mm to match your board, print the fit test, then make hooks, bins and racks.

    Open Pegboard parts

No, I’m starting fresh

  1. Compare the wall systems side by side. openGrid and French cleats are good all-rounders.

    Open Storage systems compared
  2. Print a board and a fit test first, then snaps, hooks, shelves and bins.

    Open openGrid
  3. Or go with a French cleat: a rail on the wall and parts that drop onto it.

    Open French cleat parts

Make a holder for my tools

A bin with a pocket shaped to each tool.

  1. Pick your tools from the list, and download the holder.

    Open Holders

Make a case for a Pi or Arduino

A case with the right holes for your board, and a lid that fits.

  1. Pick your board, tick the ports you need, add a fan or your logo, and download it.

    Open Electronics enclosures

Learn Arduino or Raspberry Pi

Click-through wiring and code you can run in your browser. Free, nothing to buy first.

  1. Start in the Arduino Lab: click a pin to see how each part is wired.

    Open Arduino Lab
  2. Then write the code for it and watch it run on a virtual board.

    Open Arduino code practice
  3. Or start with a Raspberry Pi: from first boot to a finished project.

    Open Raspberry Pi lessons

Build a button box

Lay it out, get the wiring and code, and print the box.

  1. Place your buttons and switches. It works out the wiring and code, and makes the box to print.

    Open Button Box Workbench

Add parts to my sim rig

Screen housings, mounts, and the electronics to go with them.

  1. Pick a part (screen housings, button boxes, mounts), set it to your gear, and download it.

    Open Sim rig parts
  2. Read the guide to wire up screens and lights with SimHub.

    Open Sim rig electronics

Find something to print

Models other makers have shared, free to download.

  1. Browse or search the models makers share, and download one.

    Open Model gallery
  2. See what people have actually printed, for ideas.

    Open Showcase

Fix a print that failed

Work out what went wrong and how to stop it happening again.

  1. Check the how-to guides for your problem (not sticking, stringing, warping…).

    Open How-to guides
  2. Look after your printer: most failures come from a dirty bed or a worn part.

    Open Printer care
  3. A VERTEX model printed badly? Report it in the Patch Bay with a photo, and we’ll fix the generator.

    Open Patch Bay
  4. Still stuck? Post a photo in the forum and someone will help.

    Open Forum

Share something I made

Post your design or a photo of your print.

  1. Make a free account (you only need one to share).

    Open Sign up
  2. Upload your model, pick a licence and publish it.

    Open Share a model
  3. Or just post a photo of something you printed.

    Open Showcase

Meet other makers

Ask questions, show off, and join in.

  1. Say hello in the forum, or ask anything.

    Open Forum
  2. Enter a contest or a build sprint.

    Open Contests
  3. Follow makers whose models you like.

    Open Model gallery