Printers / Creality Ender-3 V3 Plus
Gridfinity on theCreality Ender-3 V3 Plus
A 300 × 300 mm bed prints Gridfinity baseplates up to 6 × 6 units in one piece.
Biggest plate6 × 6
That is252 × 252 mm
Tallest bin46 units
How it works
- Measure the drawer. Inside width and depth, in millimetres.
- Open the generator with the Creality Ender-3 V3 Plus chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
- Download one 3MF with every tile and the clip sheet, open it in your slicer and print.
Keep it printing
Creality's own maintenance guides, and our routine for any printer in Printer care.
On the K1 series, check the X-axis shaft about every 300 printing hours.
Printers with the same bed
Creality Ender-3 MaxSame 300 × 300 mm bedCreality Ender-3 Max NeoSame 300 × 300 mm bedCreality Ender-3 S1 PlusSame 300 × 300 mm bedCreality CR-10Same 300 × 300 mm bedCreality CR-10 V2 / V3Same 300 × 300 mm bedCreality CR-10 SmartSame 300 × 300 mm bedCreality K1 MaxSame 300 × 300 mm bedAnycubic Mega XSame 300 × 300 mm bed