Printers / Creality Ender-3 V2 Neo
Gridfinity on theCreality Ender-3 V2 Neo
A 220 × 220 mm bed prints Gridfinity baseplates up to 5 × 5 units in one piece.
Biggest plate5 × 5
That is210 × 210 mm
Tallest bin35 units
How it works
- Measure the drawer. Inside width and depth, in millimetres.
- Open the generator with the Creality Ender-3 V2 Neo chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
- Download one 3MF with every tile and the clip sheet, open it in your slicer and print.
Keep it printing
Creality's own maintenance guides, and our routine for any printer in Printer care.
On the K1 series, check the X-axis shaft about every 300 printing hours.
Printers with the same bed
Creality Ender-3Same 220 × 220 mm bedCreality Ender-3 ProSame 220 × 220 mm bedCreality Ender-3 V2Same 220 × 220 mm bedCreality Ender-3 S1Same 220 × 220 mm bedCreality Ender-3 S1 ProSame 220 × 220 mm bedCreality Ender-3 V3Same 220 × 220 mm bedCreality Ender-3 V3 SESame 220 × 220 mm bedCreality Ender-3 V3 KESame 220 × 220 mm bed