Skip to content

Printers / Bambu Lab P1S

Bambu Lab P1S
Gridfinity on the

Bambu Lab P1S

A 256 × 256 mm bed prints Gridfinity baseplates up to 5 × 5 units in one piece.

Biggest plate5 × 5
That is210 × 210 mm
Tallest bin35 units
256 × 256 mm

How it works

  1. Measure the drawer. Inside width and depth, in millimetres.
  2. Open the generator with the Bambu Lab P1S chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
  3. Download one 3MF with every tile and the clip sheet, open it in your slicer and print.

Keep it printing

Bambu Lab's own maintenance guides, and our routine for any printer in Printer care.

Carbon rods on the X1 and P1 are cleaned, never oiled. Swap the X1’s carbon filter about every three months of daily use.

Printers with the same bed