Printers / Bambu Lab H2D
Gridfinity on theBambu Lab H2D
A 325 × 320 mm bed prints Gridfinity baseplates up to 7 × 7 units in one piece.
Biggest plate7 × 7
That is294 × 294 mm
Tallest bin45 units
How it works
- Measure the drawer. Inside width and depth, in millimetres.
- Open the generator with the Bambu Lab H2D chosen. It splits the plate into the fewest tiles that fit your bed, evenly, and counts the clips you need.
- Download one 3MF with every tile and the clip sheet, open it in your slicer and print.
Keep it printing
Bambu Lab's own maintenance guides, and our routine for any printer in Printer care.
- Official maintenance guide ↗
- X1 series ↗
- P1 series ↗
- A1 ↗
- A1 mini ↗
- H2 series (H2D) ↗
- H2 laser module (40 W) ↗
- Laser cleaning tips ↗
Carbon rods on the X1 and P1 are cleaned, never oiled. Swap the X1’s carbon filter about every three months of daily use.