Skip to content

VERTEX · Hybrid Enclosure Foundry

Cut the walls. Print the corners.

A box from laser-cut panels, held by eight printed corner blocks or by finger joints cut into the panels themselves. Set the size, the sheet and the corners, pull it apart to see how it goes together, then take the cut plate to the laser and any printed parts to the printer.

Panels
Acrylic · ply
Corners
8 printed
Or
Finger joints
Kerf
Allowed for
Files
SVG · DXF · 3MF

The box

Laser kerf and panel fit

The laser burns away the kerf on every cut: panels are drawn half a kerf bigger and holes half a kerf smaller, so they come out at size. Finger joints get the same treatment, so the fingers fit snug. Measure yours and it fills in here.

How it goes together

Laser-cut panelsPrinted corner blocksFixings

The printed parts

One corner block, printed eight times, any face down. The 3MF has the block and, with a fan, the flange.

Laser cut list

Bill of materials